Platform CNC Waterjet Cutting Machine

Home » Products » CNC Waterjet Cutting Machine » Gantry Platform CNC Water Jet Cutter » TK-Trump-G2040 Platform CNC Waterjet Cutting Machine (Gantry Type)
Platform CNC Waterjet Cutting Machine




TK-Trump-G2040 Platform CNC Waterjet Cutting Machine (Gantry Type)
This is a big size machine with the cutting size of X2000mm and Y4000mm, and the cutting table of divided design. It needs a 40 feet container in delivery, and is suitable for marble cutting, stone cutting, and steel processing.





Technical Specifications
ModelTK-Trump-G2040
Travel of each axisX-axis2100mm
Y-axis4100mm
Z-axis220mm/320mm (optional)
Cutting rangeX-axis2000mm
Y-axis4000mm
Z-axis200mm/300mm (optional)
Drive motorAC servomotor with coder (Panasonic, YASKAWA or FUJI)
Drive componentX, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics)
Maximal workpiece weight4000kg (500kg/m2)
NC control systemTKW-NC Studio three-axis CNC water cutting control system
Control precisionX-axis, Y-axis, Z-axis: 0.001mm
Reposition accuracyX-axis, Y-axis, Z-axis: less than ±0.04mm
Cutting toleranceLess than ±0.05mm
Plane straightness accuracyLess than ±0.05mm
Plane verticalityLess than ±0.04mm/300mm
Moving speed0-18m/min.
Cutting speed0-15m/min
Water and dust proofAll moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel.
Protection of power outageThe computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
Lubricating systemThe fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts.
Water level control systemWater level control to perform cutting underwater, splashless and noiseless. (optional)
Sludge removal systemThe settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional)
Automatic abrasive supply systemIt uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional)

Inquiry Form
Other Products
  • Water Jet Fan Cooling System The water jet fan cooling system can blow away the heat from oil through its heat exchange radiator, when the return oil of the hydraulic pump is directly input to the closed fan cooler. It is manufactured with high durability, as the return oil pressure of the hydraulic pump is very large. Hence, a check valve is added to effectively protect the system from damaged due to the peak pressure...
  • Water Jet Cutting Machine Chiller Our water jet cutting machine chiller is used to cool the hydraulic system of intensifier, making our water jet cutter especially available in hot environment such as the Middle East and desert regions. Through regular check of the cooling liquid and replacement every 12 months, the hydraulic pump can enjoy maximal cooling efficiency and long service life. During working, the electric power consumption is 3 kilowatt, including that of the compressor and water circulation pump...