TK-Trump-C1530 Platform CNC Waterjet Cutting Machine (Cantilever Type)
This is the best seller in cantilever type. It comes with a cutting range of X1500mm and Y3000mm. It can be provided with under water cutting device and independently designed water tank. The machine needs a 20 feet container in delivery.
Model | TK-Trump-C1530 | |
Travel of each axis | X-axis | 1600mm |
Y-axis | 3000mm | |
Z-axis | 220mm/320mm (optional) | |
Cutting range | X-axis | 1500mm |
Y-axis | 3000mm | |
Z-axis | 200mm/300mm (optional) | |
Drive motor | AC servomotor with coder (Panasonic, Yaskawa, Fuji) | |
Drive component | X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics) | |
Maximal workpiece weight | 4000kg (500kg/m2) | |
NC control system | TKW-NC Studio three-axis CNC water cutting control system | |
Control precision | X-axis, Y-axis, Z-axis: 0.001mm | |
Reposition accuracy | X-axis, Y-axis, Z-axis: less than ±0.04mm | |
Cutting tolerance | Less than ±0.05mm | |
Plane straightness accuracy | Less than ±0.05mm | |
Plane verticality | Less than ±0.04mm/300mm | |
Moving speed | 0-18m/min. | |
Cutting speed | 0-15m/min | |
Water and dust proof | All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel. | |
Protection of power outage | The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting. | |
Lubricating system | The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts. | |
Water level control system | Water level control to perform cutting underwater, splashless and noiseless. (optional) | |
Sludge removal system | The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional) | |
Automatic abrasive supply system | It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional) |